EMC 69001166 manual Server with For additional NICs, Documentation SANsurfer

				Windows Installation Checklists
Task		With Access Logix	Without Access Logix		Reference Document
5	Server with	For additional NICs	N/A		Microsoft documentation
	CX500i storage	❑ Download and install Microsoft
	system	iSCSI Software Initiator.
		❑ Use the appropriate Microsoft
		network tool (for example, Start >
		Settings > Network
		Connections) to assign the
		network parameters (IP address,
		subnet mask, and gateway) for
		each NIC.
		For additional iSCSI HBAs			QLogic SANsurfer
		❑ Download and install QLogic			documentation
		SANsurfer.
		❑ Use SANsurfer to assign the
		network parameters (IP address,
		subnet mask, and gateway) for
		each iSCSI HBA.
6	Storage System	❑ If currently installed	❑ If currently installed		Navisphere Manager
	Update software	storage-system software is not at	storage-system software is not at		administrator’s guide
		the required minimum revision,	the required minimum revision,		and online help
		update it.	update it.
		CAUTION During the software	CAUTION During the software
		update, hosts connected to the	update, hosts connected to the
		storage system will lose access	storage system will lose access
		to data if they do not have failover	to data if they do not have failover
		software or if all paths to an SP	software or if all paths to an SP
		are down.	are down.
		For an FC4500 storage system, go to	For an FC4500 storage system, go to
		step 8.	step 8.

PowerPath Checklist — Existing Windows Server and Existing Storage System

7-47