EMC 69001166 manual Storage system Fibre Channel For a Fibre Channel SAN, Disks

Windows Installation Checklists

Task		With Access Logix	Reference Document
14	Storage System	❑ Use the following Navisphere CLI commands to set the following default	Navisphere CLI
	Set Properties for	storage-system properties:	reference
	PowerPath	navicli -h hostname systemtype -config 3
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the
		storage system.
15	Fibre Channel	For a Fibre Channel SAN	Switch management
	Switches	❑ Zone the Fibre Channel switches to provide a path from each additional	documentation
	Zone additional
		HBA port (host initiator) to the SPs.
	paths
		❑ If SAN Copy, MirrorView, or MirrorView/A is installed, create any required
		zones.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.
16	Server	❑ Restart the Host Agent, then use the Disk Management tool to scan for	Windows documentation
	Make target SPs	disks.
	available	If the disks are not visible, scan for them once more.
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
		to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help

PowerPath Checklist — Existing Windows Server and New Storage System

7-41