EMC 69001166 manual Zone, Available

			AIX Installation Checklists
Task		With Access Logix	Reference Document
13	Switches	For a SAN	Switch management
	Zone	❑ Zone the switches to provide a path from each HBA port (host initiator) to	documentation
		the appropriate SPs.
		❑ If MirrorView is installed, create any required zones for it.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.
14	Server	❑ Execute the following AIX command:	AIX documentation
	Make target SPs	emc_cfgmgr.sh
	available	❑ Checkpoint - Verify that AIX sees LUNZ devices with the following AIX
		command:
		lscfg grep LUNZ
		If AIX does not see LUNZ devices
		• Verify that arraycommpath is set to 1 as described in step 12.
		• Execute the following AIX command:
		emc_cfgmgr.sh
		❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility	CX-Series Server
		with the following AIX commands:	Software for AIX
		Host Agent/	Installation Guide
		etc/rc.agent stop
		/etc/rc.agent start
		Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
		to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help
		❑ List the LUNZ devices with the following AIX command:	AIX documentation
		lscfg grep LUNZ
		❑ Remove each LUNZ device with the following AIX command:
		rmdev -dl hdiskn
		where n is the hdisk number for the LUNZ device.
		❑ Execute the following AIX command:
		emc_cfgmg.sh

PowerPath Checklist — New AIX Server and New Storage System

1-9