Troubleshooting, Adjustment & Service

TROUBLESHOOTING WARNING

While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.

The troubleshooting guide below lists the most common problems, their causes and remedies.

See the information on the following pages for instructions on how to perform most of these minor adjustments and service repairs yourself. If you prefer, all of these procedures can be performed for you by your local authorized dealer.

To avoid serious injury, perform maintenance on the tractor or mower only when the engine is stopped and the parking brake engaged.

Always remove the ignition key, disconnect the spark plug wire and fasten it away from the plug before beginning the maintenance, to prevent accidental starting of the engine.

Troubleshooting

TROUBLESHOOTING THE RIDER

PROBLEM

CAUSE

REMEDY

Engine will not turnover or start.

1.

Parking brake not engaged.

1.

Engage parking brake.

 

2.

PTO (electric clutch) switch

2.

Place in OFF position.

 

 

in ON position.

 

 

 

3.

Ground Speed Control Levers

3. Move Ground Speed Control Levers

 

 

are not in the neutral position.

 

to the neutral position.

 

4.

Out of fuel.

4.

If engine is hot, allow it to cool, then refill

 

 

 

 

the fuel tank.

 

5.

Engine flooded.

5.

Move choke control to closed position.

 

6.

Fuse blown.

6.

Replace fuse.

 

7.

Battery terminals require

7.

Clean the battery terminals

 

 

cleaning.

 

 

 

8.

Battery discharged or dead.

8.

Recharge or replace.

 

9.

Wiring loose or broken.

9. Visually check wiring & replace broken or

 

 

 

 

frayed wires. Tighten loose connections.

 

10.

Solenoid or starter motor faulty.

10. Repair or replace. See authorized

 

 

 

 

dealer

 

11.

Safety interlock switch

11. Replace as needed. See authorized

 

 

faulty.

 

service dealer.

 

12.

Spark plug(s) faulty, fouled

12. Clean and gap or replace.

 

 

or incorrectly gapped.

 

See engine manual.

 

13.

Water in fuel.

13. Drain fuel & replace with fresh fuel.

 

14.

Gas is old or stale.

14. Drain fuel & replace with fresh fuel.

 

 

 

 

 

Engine starts hard or runs poorly.

1.

Fuel mixture too rich.

1.

Clean air filter. Check choke adjustment.

 

2.

Spark plug faulty, fouled, or

2.

Clean and gap or replace.

 

 

incorrectly gapped.

 

(See engine manual.)

 

 

 

 

 

Engine knocks.

1.

Low oil level.

1.

Check/add oil as required.

 

2.

Using wrong grade oil.

2.

See engine manual.

 

 

 

 

 

Excessive oil consumption.

1.

Engine running too hot.

1.

Clean engine fins, blower screen and

 

 

 

 

air cleaner.

 

2.

Using wrong weight oil.

2.

See engine manual.

 

3.

Too much oil in crankcase.

3.

Drain excess oil.

 

 

 

 

 

Engine exhaust is black.

1.

Dirty air filter.

1.

Replace air filter. See engine manual.

 

2.

Engine choke control

2.

Open choke control.

 

 

is in closed position.

 

 

32

www.ferrisindustries.com

Page 33 Page 35
Page 34
Image 34
Ferris Industries 5900761, 5900751 manual Troubleshooting Warning, Troubleshooting the Rider
Page 33 Page 35

5900761, 5900751 specifications

Ferris Industries has long been recognized for its innovative approach to outdoor power equipment, and the models 5900751 and 5900761 exemplify this commitment to quality and performance. With features tailored for both residential and commercial use, these products showcase advanced technologies that enhance user experience and operational efficiency.

The Ferris Industries 5900751 model stands out with its robust build and powerful engine, designed to tackle a variety of mowing tasks effortlessly. This model is equipped with a reliable commercial-grade engine that provides ample power to tackle even the most challenging terrains. The cutting deck, optimized for superior grass clipping management, ensures a clean and even cut, making it ideal for maintaining professional-looking lawns.

Similarly, the 5900761 brings its own unique set of features that make it a formidable choice for larger properties or commercial settings. One of its standout characteristics is the durable construction that helps resist wear and tear over time. With a larger cutting deck and an efficient powertrain, this model is designed to cover more ground in less time, boosting productivity significantly.

Both models incorporate Ferris's patented suspension technology. The advanced suspension system reduces operator fatigue, allowing for longer mowing sessions with greater comfort. This technology also improves traction and stability on uneven surfaces, ensuring a smoother ride regardless of the landscape.

In terms of technology, both the 5900751 and 5900761 feature user-friendly controls that enhance maneuverability. The intuitive dashboard displays vital information, providing operators with insights into performance metrics at a glance. Additionally, the ease of maintenance is a focal point, with accessible components that streamline service tasks, ensuring that downtime is minimized.

The ergonomic design of the handles and seat enhances user comfort and control, allowing for effortless navigation around obstacles. Safety features such as a reliable braking system and roll-over protection further ensure that operators can work with confidence.

In summary, Ferris Industries models 5900751 and 5900761 are powerful and efficient solutions for anyone looking to invest in reliable outdoor power equipment. With their durable design, advanced suspension technology, and user-focused features, these models continue to set the standard for excellence in the industry. Whether for personal use or professional landscaping, Ferris delivers equipment that meets the demands of any task with exceptional performance.
Top Page Image Contents