Manuals / Ferris Industries / Lawn and Garden / Lawn Mower

Ferris Industries 5900751, 5900761 manual Sharpening the Mower Blade, Balancing the Mower Blades

Models: 5900761 5900751

1 50
Download 50 pages 41.12 Kb
Page 33
Image 33

Sharpening the Mower Blade

CAUTION

Avoid injury! Mower blades are sharp.

•Always wear gloves when handling the mower blades.

•Always wear safety eye protection when grinding.

1.Sharpen the mower blades with grinder, hand file, or electric blade sharpener.

2.Sharpen the mower blade by removing an equal amount of material from each end of the mower blade.

3.Keep the original bevel (A, Figure 27) when grinding. DO NOT change the mower blade bevel.

4.The mower blade should have a maximum 1/64” (0,40 mm) cutting edge (B) or less.

5.Balance the mower blades before installing.

Balancing the Mower Blades

CAUTION

Avoid injury! Keep mower blades balanced.

•An unbalanced mower blade can create excessive vibration and damage the unit or cause mower blade failure.

1.Clean the mower blade to remove any dried grass or other debris.

2.See Figure 28. Put the mower blade on a nail in a vise and turn the mower blade to the horizontal position.

3.Check the balance of the mower blade. If either end of the mower blade moves downward, sharpen the heavy end until the mower blade is balanced. See Sharpening the Mower Blades for proper sharpening instructions.

4.Repeat the process until the mower blade remains in the horizontal position.

Reinstalling the Mower Blades

WARNING

For your personal safety, each mower blade mounting bolt must be installed with a hex/spline washer and spring washer, then securely tightened. Torque mower blade mounting bolt to 45-55 ft. lbs. (61-75 Nm).

1.Reinstall each mower blade with the air lifts pointing up towards the mower deck as shown in Figure 29. Wedge a wooden block between the mower blade and the mower deck housing, and secure the mower blade with the mower blade mounting bolt, hex washer and spring washer (A, B & E, Figure 29) and torque to 45-55 ft. lbs. (61- 75 Nm).

Regular Maintenance

A

B

Figure 27. Sharpening the Mower Blade

A.Mower Blade Bevel

B.Mower Blade Cutting Edge

A

Figure 28. Balancing the Mower Blade A. Nail

B

A

D

Figure 29. Tightening the Mower Blade for Installation

A.Mower Blade Mounting Bolt

B.Flat Washer

C.Mower Blade Air Lift (Install With Points Up)

D.4 X 4 Wooden Block

31

Maintenance

Page 32 Page 34
Page 33
Image 33
Ferris Industries 5900751, 5900761 Sharpening the Mower Blade, Balancing the Mower Blades, Reinstalling the Mower Blades
Page 32 Page 34

5900761, 5900751 specifications

Ferris Industries has long been recognized for its innovative approach to outdoor power equipment, and the models 5900751 and 5900761 exemplify this commitment to quality and performance. With features tailored for both residential and commercial use, these products showcase advanced technologies that enhance user experience and operational efficiency.

The Ferris Industries 5900751 model stands out with its robust build and powerful engine, designed to tackle a variety of mowing tasks effortlessly. This model is equipped with a reliable commercial-grade engine that provides ample power to tackle even the most challenging terrains. The cutting deck, optimized for superior grass clipping management, ensures a clean and even cut, making it ideal for maintaining professional-looking lawns.

Similarly, the 5900761 brings its own unique set of features that make it a formidable choice for larger properties or commercial settings. One of its standout characteristics is the durable construction that helps resist wear and tear over time. With a larger cutting deck and an efficient powertrain, this model is designed to cover more ground in less time, boosting productivity significantly.

Both models incorporate Ferris's patented suspension technology. The advanced suspension system reduces operator fatigue, allowing for longer mowing sessions with greater comfort. This technology also improves traction and stability on uneven surfaces, ensuring a smoother ride regardless of the landscape.

In terms of technology, both the 5900751 and 5900761 feature user-friendly controls that enhance maneuverability. The intuitive dashboard displays vital information, providing operators with insights into performance metrics at a glance. Additionally, the ease of maintenance is a focal point, with accessible components that streamline service tasks, ensuring that downtime is minimized.

The ergonomic design of the handles and seat enhances user comfort and control, allowing for effortless navigation around obstacles. Safety features such as a reliable braking system and roll-over protection further ensure that operators can work with confidence.

In summary, Ferris Industries models 5900751 and 5900761 are powerful and efficient solutions for anyone looking to invest in reliable outdoor power equipment. With their durable design, advanced suspension technology, and user-focused features, these models continue to set the standard for excellence in the industry. Whether for personal use or professional landscaping, Ferris delivers equipment that meets the demands of any task with exceptional performance.