EMC 69001166 manual Manage the storage system, Not already defined and any additional users

HP-UX Installation Checklist

Task		With Access Logix	Reference Document
9	Storage System	❑ Connect the storage system to the switch or HBA ports.	Storage-system setup
	Cable to switch or		guide
	server and LAN	❑ Checkpoint - For a SAN, verify the storage-system connections to the
		switch by checking the LED(s) for the switch port connected to each SP
		port.
		For a 1-Gbit switch - LED is green, which indicates that the SP is logged in
		to the switch port.
		For a 2-Gbit switch - One of the following:
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off, which
		indicates that a 2-Gbit HBA port is logged in to the switch port.
		❑ Cable each SP to the LAN connected to the hosts from which you will
		manage the storage system.
10	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if	Navisphere security
	Set up security	not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help
11	Storage System	❑ From a laptop connected to the storage system, as described in the	Storage-system
	Set properties for	storage-system initialization or setup guide, use the following Navisphere	initialization guide and
		CLI commands to set the default storage-system properties:	Navisphere CLI
	PowerPath
			reference
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the storage
		system.

2-28

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems