EMC 69001166 Navicli -h hostname Failovermode Arraycommpath, For existing HBAs, Ports initiators

AIX Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
9	Storage System		For any HBAs (cont.)	Navisphere CLI
	Set properties for		❑ Use the following Navisphere CLI	reference
	PowerPath (cont.)
			commands to set the storage
			system’s default failover mode
			and array commpath properties:
			navicli -h hostname
			failovermode 1
			navicli -h hostname
			arraycommpath 1
			where hostname is the IP
			address or network name of an
			SP in the storage system.
			Note: Setting the array
			commpath property to 1
			(enabled) creates LUNZ devices.
			You will have to remove the LUNZ
			devices later in the procedure.
		For existing HBAs		Navisphere Manager
		❑ Use Navisphere Manager’s		administrator’s guide
				and online help
		Failover Setup Wizard (selected
		from the Tools menu on the
		toolbar) to set the storage
		system’s initiator type, failover
		mode, and array commpath
		properties for the server’s HBA
		ports (initiators):
		Initiator Type to CLARiiON Open
		Failover mode to 1
		Array commpath to Enabled
		Note: Setting the array
		commpath property to 1
		(enabled) creates LUNZ devices.
		You will have to remove the LUNZ
		devices later in the procedure.

1-34

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems