EMC 69001166 manual System Port on the storage system Guide, Scan for disks

Windows Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
14	FC4500 Storage	❑ Connect a computer to the serial	❑ Connect a computer to the serial	Storage-system setup
	System	port on the storage system.	port on the storage system	guide
	Set properties for	❑ From the computer connected to	❑ From the computer connected to	Navisphere CLI
	PowerPath	the storage system’s serial port,	the storage system’s serial port,	reference
		use the following Navisphere CLI	use the following Navisphere CLI
		commands to set the following	command to determine the
		storage-system properties for the	default storage-system type:
		server’s HBA or NIC ports	navicli -np -d device
		(initiators):
			systemtype
		navicli -np -d device
			where device is the name of the
		storagegroup -sethost -host
			computer port connected to the
		servername -type 3
			storage-system serial port (for
		navicli -np -d device
			example, com1).
		storagegroup -sethost -host	If the default storage-system
		servername -failovermode 1
			system type is not 3 (CLARiiON
		navicli -np -d device	Open), use the following
		storagegroup -sethost -host	Navisphere CLI command to set
		servername -arraycommpath 1	it to 3:
		where	navicli -np -d device
		device is the name of the	systemtype -config 3
		computer port connected to the	CAUTION The above command
		storage-system serial port (for	reboots both SPs at the same
		example, com1).	time.
		servername is the name of the
		server with the HBAs.
			❑ From the computer connected to
			the storage system’s serial port,
			use the following Navisphere CLI
			commands to set the following
			default storage-system
			properties:
			navicli -np -d device
			failovermode 1
			navicli -np -d device
			arraycommpath 1
			where device is the name of the
			computer port connected to the
			storage-system serial port (for
			example, com1).
15	Server	❑ Use the Disk Management tool to	❑ Use the Disk Management tool to	Windows documentation
	Make target SPs	scan for disks.	scan for disks.
	available

7-20

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems