EMC 69001166 System Host, Failovermode Existing ports initiators, Name Storagegroup -sethost

HP-UX Installation Checklist

Task	With Access Logix	Without Access Logix	Reference Document
13 FC4500 Storage	From an attached host or networked	From an attached or networked host	Navisphere CLI
System	host	❑ Use the following Navisphere CLI	reference
Set properties for	❑ Use the following Navisphere CLI
		commands to set the following
PowerPath (cont.)	commands to set the following	default storage-system properties:
	default storage-system properties	navicli -ddevice -hhostname
	for the server’s existing HBA
		failovermode 1
	existing ports (initiators):
		navicli -ddevice -hhostname
	navicli -ddevice -hhostname
		arraycommpath 1
	storagegroup -sethost
	-failovermode 1	where
	navicli -ddevice -hhostname	device is the storage system’s
		name
	storagegroup -sethost
		hostname is the server’s name or
	-arraycommpath 1
	where	network address.
	device is the storage system’s
	name
	hostname is the server’s name or
	network address.
	From a serially connected laptop	From a serially connected laptop	Storage-system setup
	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI	guide and Navisphere
			CLI reference
	commands to set the following	commands to set the following
	default storage-system properties	default storage-system properties:
	for the server’s existing HBA	navicli -np -d device
	existing ports (initiators):
		failovermode 1
	navicli -np -d device	navicli -np -d device
	storagegroup -sethost -host
		arraycommpath 1
	servername -failovermode 1
		where device is the name of the
	navicli -np -d device
		computer port connected to the
	storagegroup -sethost -host
		storage-system serial port (for
	servername --arraycommpath 1
		example, com1).
	where
	device is the name of the
	computer port connected to the
	storage-system serial port (for
	example, com1).
	servername is the name of the
	server with the HBAs.

2-20

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems