EMC 69001166 manual Bindings to the HBA driver, Configuration file, Make paths to

				Solaris Installation Checklists
Task		With Access Logix	Without Access Logix		Reference Document
11	Server	❑ If you updated the driver or added	❑ If you updated the driver or added		Solaris utilities kit
	Make target SPs	additional HBAs, add persistent	additional HBAs, add persistent		administrator’s guide
		bindings to the HBA driver	bindings to the HBA driver
	available
		configuration file.	configuration file.
		Note Removing ATF does not	Note Removing ATF does not
		remove or change the persistent	remove or change the persistent
		bindings.	bindings.
		❑ Edit the /kernel/drv/sd.conf file	❑ Edit the /kernel/drv/sd.conf file		Solaris driver.conf man
		to add LUNs for the new targets.	to add LUNs with new targets.		page
		❑ If you added persistent bindings,	❑ If you added persistent bindings,		Solaris documentation
		reboot the server using the	reboot the server using the
		reboot - - -r command so the	reboot - - -r command so the
		HBAs can see the targets (SPs).	HBAs can see the targets (SPs).
		❑ Checkpoint - Use the inquiry	❑ Checkpoint - Use the inquiry
		option of the format command to	option of the format command to
		verify the paths to the storage	verify the paths to the storage
		system. Alternate paths will have	system. Alternate paths will have
		a device with an ID of drive type	a device with an ID of drive type
		unknown.	unknown.
12	Server	❑ Use Navisphere Manager to	N/A		Navisphere Manager
	Make paths to	disconnect and then reconnect			administrator’s guide
		the server and its Storage Group.			and online help
	additional HBAs
	available	❑ Reboot the server using the
		reboot - - -r command so the
		HBAs can see the LUNs in the
		Storage Group.

PowerPath Checklist — Existing Solaris Server and Existing Storage System

5-41