EMC 69001166 manual Task With Access Logix Without Access Logix

Windows Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
7 CX-Series or	For new or replacement HBAs	For any HBAs	Navisphere CLI
FC4700-Series	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI	reference
Storage System
Set properties for	command to determine the	command to determine the
	default storage-system type:	default storage-system type:
PowerPath	navicli -h hostname systemtype	navicli -h hostname systemtype
	where hostname is the IP	where hostname is the IP
	address or network name of an	address or network name of an
	SP in the storage system.	SP in the storage system.
	If the default storage-system	If the default storage-system
	system type is not 3 (CLARiiON	system type is not 3 (CLARiiON
	Open), use the following	Open), use the following
	Navisphere CLI command to set	Navisphere CLI command to set
	it to 3:	it to 3:
	navicli -h hostname systemtype	navicli -h hostname systemtype
	-config 3	-config 3
	CAUTION The above command	CAUTION The above command
	reboots both SPs at the same	reboots both SPs at the same time.
	time.
	For new or replacement HBAs	For any HBAs (cont.)	Navisphere CLI
	(cont.)	❑ Use the following Navisphere CLI	reference
	❑ Use the following Navisphere CLI	commands to set the following
	commands to set the following	default storage-system
	default storage-system	properties:
	properties:	navicli -h hostname
	navicli -h hostname	failovermode 1
	failovermode 1	navicli -h hostname
	navicli -h hostname	arraycommpath 1
	arraycommpath 1	where hostname is the IP
	where hostname is the IP
		address or network name of an
	address or network name of an	SP in the storage system.
	SP in the storage system.

7-48

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems