EMC 69001166 manual Verify DMP, Installation, Operation

			HP-UX Installation Checklist
Task		With Access Logix		Reference Document
15	Server	❑ Log into Volume Manager Storage Administrator (VMSA)		VERITAS Volume
	Verify DMP	❑ Double-click a disk icon.		Navisphere Manager
				documentation
	installation
		❑ In the list of disks, double-click a disk you know belongs to the CLARiiON
		storage system.
		❑ Click the disks tab to verify there are the expected number of Primary and
		Secondary paths.
		❑ Verify that it displays the correct number of paths with
		vxdisk list device
		where device is the name of the disk you selected.
16	Server	❑ Start I/O to the VERITAS Volume.		VERITAS Volume
	Verify DMP	❑ Identify the CLARiiON devices under the Volume with		Manager
				documentation
	Operation
		vxprint -v
		❑ Choose one of the CLARiiON devices and determine all its paths with
		vxdisk list device
		or
		vxdmpadm getsubpaths
		dmpnodename=device
		where device is the name of the CLARiiON device
		❑ Determine the control through which I/O is going with		HP-UX documentation
		iostat -xn
		❑ Determine the controller through which I/O is going with
		iostat -xn
		❑ Determine the HBA and SP to which that controller corresponds.
		❑ Disconnect the path to that SP.
		❑ Verify that the path to the chosen CLARiiON device is disabled with
		vxdisk list device
		or
		vxdmpadm getsubpaths
		dmpnodename=device
		where device is the name of the CLARiiON device

DMP Checklist - New HP-UX Server and New Storage System

2-51