EMC 69001166 manual Solaris, PowerPath for

Solaris Installation Checklists

Task		With Access Logix	Reference Document
16	Server	❑ Prepare the LUNs to receive data by	Solaris host
	Make LUNs	• Specifying Solaris mount point names for them	connectivity guide or
			Solaris documentation
	available to	• Labeling and partitioning them
	Solaris
		• Mounting file systems on them
		• Mounting them to the mount points
17	Server	❑ Use the following PowerPath commands to configure PowerPath for any	PowerPath product
	Configure	missing logical devices so all paths to LUNs are visible:	guide
	PowerPath for	powercf -i or powercf -q
	missing devices	powermt config
		❑ Checkpoint - Use the following PowerPath command to verify that
		PowerPath sees all the paths to the LUNs:
		powermt display dev=all class=clariion
		If PowerPath cannot see all the paths, verify that
		• You registered your PowerPath license key if you have one.
		• the storage-system properties are set as defined in step 11.
18	Server	If you have a PowerPath license key
	Test PowerPath	Note If your PowerPath license key is not registered, the load balancing policy
	with a license	is restricted to basic failover.
	key	❑ Stop all applications accessing the storage system and disable user logins
		to the server.
		❑ View the LUNs available to the server using the following PowerPath	PowerPath product
		command:	guide
		powermt display dev=all class=clariion
		❑ Choose one available LUN to receive I/O for the test.
		❑ View the paths to the chosen LUN using the PowerPath following
		command:
		powermt display dev=x every=2
		where x is a pseudo device that represents the chosen LUN.

5-12

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems