EMC 69001166 manual That you will connect to the SPs in a CX200, CX300, CX400

Required Host Software Revisions

NetWare Installation Checklists

◆NetWare operating system revision and kernel listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com)

◆HBA driver revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com)

◆NetWare PowerPath

•For CX200, CX400, CX600, or FC4700-Series storage systems Version 3.0.0 with patch 3.0.1 or higher

•For CX300, CX500, CX700 storage systems Version 3.0.1 or higher

•For FC4500 storage systems

Version 3.0.0 with patch 3.0.2 or higher

Refer to the EMC Support Matrix and the EMC PowerPath Release Notes for UNIX on the Powerlink website (http://powerlink.emc.com) for the specific revision required for your NetWare version.

Prerequisites	◆ You must have a host that is
	• Running an operating system that can support the Navisphere
	Manager 6.X browser-based client. For an up-to-date list of
	such operating systems, refer to the Navisphere Manager 6.X
	release notes on http://powerlink.emc.com.
	• On a network that is connected to the storage-system server
	and that you will connect to the SPs in a CX200, CX300, CX400,
	CX500, CX600, CX700, or FC4700-Series storage system.
	◆ For most configurations, you must also have a host that is
	• Running Navisphere CLI version 6.X
	• On a network that is connected to the storage-system server
	and that you will connect to SPs in CX200, CX300, CX400,
	CX500, CX600, CX700, or FC4700-Series storage system.
	◆ For an FC4500 storage system connected to a server on which you
	will install PowerPath, you must have a computer that you can
	connect to the storage system. This computer must run
	• Windows 2000
	• Navisphere Host Agent and CLI version 6.1 or higher

PowerPath Configurations for NetWare

4-3