Appendix B Using Local Boot (the Quick-Start Procedure)
You can local boot the AN/DC or ANH-8/DC using the Site Manager Quick-Start procedure explained in this appendix. You need this information to complete the procedure in “Continuing with Local Boot” on page 3-15 .
The Quick-Start procedure is the initial configuration that starts a Nortel Networks router running on the network. The procedure enables the Internet Protocol (IP) so that the router can connect to Site Manager.
Quick-starting basically consists of running the install.bat script and entering information at the prompts. The router automatically selects options for some prompts, and you can accept default values for many of the other prompts.
To assist you in answering Quick-Startprompts, we have included a series of worksheets for you to fill out with your network administrator’s help. These worksheets contain all of the options that appear at each prompt, and space for you to record the options you select.
The last two sections in this appendix, Using the Quick-Start Commands” and Running the Quick-Start Script,” provide additional information about the Quick-Start procedure.
It is very important that you fill out the worksheets and read all sections of this appendix before you begin the Quick-Start procedure.
Note: Contact your network administrator for assistance in selecting worksheet options.
