Nortel Networks AN/DC manual Global Information Worksheet

Using Local Boot (the Quick-Start Procedure)

Global Information Worksheet

This section contains the prompts and possible options relating to all AN/ANH synchronous configurations. Write your selection in the “Your Response” column.

Global Information Worksheet

Step	Requested Information	Options	Your Response
1	Specify the slot number where	Because the AN/DC and	None.
	the Link Module resides.	ANH-8/DC is not a Link Module,
		the script bypasses this step and
		automatically accepts a default
		slot of “1.”
2	Specify the Link Module and	The script automatically provides a
	network interface information	representative letter code. The
	for the initial IP connection	network interface options are
	to Site Manager.
		— Ethernet
		— Synchronous
		Select S, the letter associated with
		the synchronous interface.
	Enter connector number [1]:	1. COM1
		2. COM2
		3. COM3
	Enter clock source number [2]:	1. Internal
		2. External
	Enter circuit name [S#]:	The script recommends a circuit	Press the Return
		name for the COM interface that	key.
		you select (for example, S11 for
		COM1 and S12 for COM2).
			(continued)

312410-A Rev 00 B-3