![](/images/new-backgrounds/1266205/266205147x1.webp)
Installing and Operating AN/DC and
1.Position the card with the label facing up and the INSERT arrow pointing toward the card receptacle.
2.Insert the card into the receptacle.
Figure 3-2 shows how to insert the Flash memory card in an AN/DC that does not have a Flash memory card protector installed.
Figure 3-3 shows how to insert the card in an ANH-8/DC.
3.Gently push the card until it fits snugly into place.
If the card is new, and you did not obtain it from Nortel Networks, you must format the card before attempting to write to it. You can format the card using Site Manager software or the format command available with the Nortel Networks Technician Interface. (Refer to Using Technician Interface Software for instructions.)
Caution: If you attempt to boot without the Flash memory card inserted, the router will not operate.
| RUN |
POWER | BOOT |
DIAG | |
| AN0015A |