FCC Part 68 Compliance Statement
This equipment complies with Part 68 of FCC Rules. All direct connections to telephone network lines must be made using standard plugs and jacks compliant with FCC Part 68. Please note the following:
1.You are required to request service from the telephone company before you connect the unit to a network. When you request service, you must provide the telephone company with the following data:
•When you request T1 Service, you must provide the telephone company with
--The Facility Interface Code
Provide the telephone company with all the codes below:
-
-
-
-
-
The telephone company will select the code it has available.
--The Service Order Code(s) (SOC): 6.0F
--The required Universal Service Order Code (USOC) jack: RJ48C
•When you request Primary Rate ISDN Service, you must provide the telephone company with
--The Facility Interface Code:
--The Service Order Code(s) (SOC): 6.0F
--The required Universal Service Order Code (USOC) jack: RJ48C
2.Your telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. The telephone company will notify you in advance of such changes to give you an opportunity to maintain uninterrupted telephone service.
3.If the unit causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible and will be informed of your right to file a complaint with the FCC.
4.If you experience trouble with the unit, please contact the Nortel Networks Technical Solutions Center in your area for service or repairs. Repairs should be performed only by service personnel authorized by Nortel Networks.
United States | |
Valbonne, France | |
Sydney, Australia | |
Tokyo, Japan |
5.You are required to notify the telephone company when you disconnect the unit from the network.
v |
