Nortel Networks AN/DC manual Router Protocol Worksheets, RIP Worksheet, Ospf Worksheet

Using Local Boot (the Quick-Start Procedure)

Router Protocol Worksheets

This section contains requested information and possible options relating to the routing protocol choices on the Global Information Worksheet.

RIP Worksheet

Requested Information	Options	Your Response
Should RIP listen to the	y(es)
default route? (y/n) [n]:	n(o)
	Note: RIP listens to a specific
	network or subnet route where
	Site Manager is located.
	Answering y(es) to this request
	forces RIP to also listen to the
	default route (0.0.0.0). This is
	useful when no specific route is
	available in the RIP updates that
	the router receives.

OSPF Worksheet

Requested Information	Options	Your Response
Enter the OSPF router ID in	Enter an IP address to uniquely
dotted decimal notation [the	identify the router in the OSPF
router provides the IP	domain.
address of the COM port]:
	We suggest using the default IP
	address provided.
Enter the OSPF area ID in	Enter the area ID. This ID must
dotted decimal notation	match the area ID of the router’s
[0.0.0.0]:	neighbor.
	Note: The backbone area ID is
	always 0.0.0.0.
Enable Simple Password	y(es)
authentication? (y/n) [n]:	n(o)
	Note: If you answer y(es), the router	Password:
	requests a password.
		______________
		(continued)
312410-A Rev 00		B-5