Nortel Networks AN/DC manual Enter the IP address for the COM

Installing and Operating AN/DC and ANH-8/DC Systems

Global Information Worksheet (continued)

Step	Requested Information	Options		Your Response
3	Enter IP address in dotted	Enter the IP address for the COM
	decimal notation:	interface.
	Enter the subnetwork mask in	Enter the subnetwork mask for the
	dotted decimal notation:	COM interface IP address.
	Is the router connected to	y(es)		Press the Return
	the same local area network	n(o)		key.
	as the Site Manager
	workstation?
	(y/n) [n]:
	Enter routing protocol	1.	RIP	(Complete the
	number [1]:	2.	OSPF	worksheet for the
		3.	Static Route to Site Manager	protocol you
				select.)
	Enter wide area protocol	1.	Nortel Networks Point-to-Point	(Complete the
	number [1]:		Protocol (Proprietary)	worksheet for the
		2.	Frame Relay	protocol you
		3.	Point-to-Point Protocol (PPP)	select.)
		Standard
		4.	Switched Multimegabit Data
		Service (SMDS)
	Do you wish to set	y(es)
	SNMP community management?	n(o)
	(y/n) [n]:
		Setting up SNMP community
		management is optional.
4	TFTP default volume [1]:	The script automatically assigns		None
		the TFTP default volume to “1.”
5	Do you want to enable	y(es)
	TELNET? (y/n) [n]:	n(o)
		Enabling TELNET is optional.
6	FTP default volume [1]:	The script automatically assigns
		the FTP default volume to “1.”
7	Do you wish to save this	y(es)		Press the Return
	configuration to a file?	n(o)		key.
	(y/n) [y]
	Enter filename [startup.cfg]:	We recommend using the default		Press the Return
		filename.		key.

B-4 312410-A Rev 00