![](/images/new-backgrounds/1207200/20720099x1.webp)
Troubleshooting
Problem |
| Action | |||
|
|
|
| ||
| The Water Level sensor is not working properly. | ||||
| • Try power off and restarting the cycle. | ||||
| • Check Water Level Sensor wire harness. | ||||
| • If the information code remains, contact a customer service | ||||
1C |
| centre. | |||
|
|
|
| ||
|
| NOTE | |||
|
| When the washer displays the “1C” code, the washer do | |||
|
| draining for 3 minutes. During this time, the Power ( |
| ) button | |
|
|
| |||
|
|
| |||
|
| is inoperative. | |||
|
|
|
| ||
| Check communications between main and sub PBAs. | ||||
AC | • Try power off and restarting the cycle. | ||||
• | If the information code remains, contact a customer service | ||||
| |||||
|
| centre. | |||
|
|
|
| ||
| MEMS sensor problem. | ||||
8C | • | Try power off and restarting the cycle. | |||
(MEMS models only) | • | If the information code remains, contact a customer service | |||
|
| centre. | |||
|
|
|
|
|
If any information code keeps appearing on the screen, contact a local Samsung service centre.
Troubleshooting
50 English
2016/4/12 11:56:10