Problem |
| Action | |||
|
|
|
| ||
| Check the drain hose. | ||||
LC | • Make sure the end of the drain hose is placed on the floor. | ||||
• | Make sure the drain hose is not clogged. | ||||
| • If the information code remains, contact a customer service | ||||
|
| centre. | |||
|
| NOTE | |||
LC1 |
| When the washer displays the “LC/LC1” code, the washer do | |||
| draining for 3 minutes. During this time, the Power ( |
| ) button | ||
|
|
| |||
|
|
| |||
|
| is inoperative. | |||
|
|
|
| ||
| Spinning does not work. | ||||
| • Make sure laundry is spread out evenly. | ||||
UB | • Make sure the washing machine is on a flat, stable surface. | ||||
• | Redistribute the load. If only one item of clothing needs | ||||
|
| washing, such as a bathrobe or pair of jeans, the final spin | |||
|
| result might be unsatisfactory, and an “UB” check message | |||
|
| will be shown in the display. | |||
|
|
|
| ||
| Check the motor for operation. | ||||
3C | • Try restarting the cycle. | ||||
• | If the information code remains, contact a customer service | ||||
| |||||
|
| centre. | |||
|
|
|
| ||
| The electronic control needs to be checked (Over Voltage Error). | ||||
| • Check the PCB and wire harness. | ||||
| • Check if power is supplied properly | ||||
| • If the information code remains, contact a customer service | ||||
UC |
| centre. | |||
| Low voltage detected | ||||
| • Check if the power cord is plugged in. | ||||
| • If the information code remains, contact a customer service | ||||
|
| centre. | |||
|
|
|
| ||
| High temperature heating check | ||||
HC | • | If the information code remains, contact a customer service | |||
|
| centre. | |||
|
|
|
|
| |
Troubleshooting
English 49
2016/4/12 11:56:10
