Mackie V7.0 manual Error code Description Default Action, 187

Configuring Xprint V7.0 Administering recovery rules

●Enter your recovery rules in the file using the following format:

Every line of the source file defines one recovery rule. Comment lines must start with the hash character (#) in the first column. Use the following format to define recovery rules:

error_code:[maximum_time]:[exception_rule_ID]:list_of_actions:

The specifications for the fields in square brackets may be omitted, but the colons for separating the fields are mandatory.

error_code is the key under which the recovery rule files are to be accessed. It can contain either an Xprint V7.0 printer error code or an action for handling a recurring error. This field is mandatory. The following printer error codes are supported:

Error code	Description	Default
		action
TonerEmpty	Toner empty	Retry
Parity	Parity error during transfer	Ignore
PaperEnd	Paper empty	Retry
Stop	Printer stopped	Retry
PowerOff	Printer switched off	Restart
CoverOpen	Printer cover open	Retry
PaperJam	Paper jam	Retry
Hangup	I/O system call interrupted due to hardware	Retry
	failure
NoAck	Time-out during ETX/ACK protocol	Retry

Table 23: Supported printer error codes

maximum_time is an option which must be specified together with the exception_rule_ID field. It activates the selection of a specific action if an error keeps recurring. By default, the value INFINITE is used. The value must lie between 0 and 65535 seconds. If the error persists after this time, Xprint V7.0 selects the action specified in the field exception_rule_ID.

You can set a printer automatically to the status NOT_ACTIVE, for example, if the paper supply is not refilled within the specified time.

U23841-J-Z915-6-76 187