Mackie V7.0 manual Switching double-sided printing on/off, Sdside specification

Using Xprint V7.0 options Producing Output with Xprint V7.0

Switching double-sided printing on/off

When printing jobs which comprise several pages, it often makes sense to change the page settings for even- and odd-numbered pages in such a way that they face each other as in a book. The margin settings should be set alternately to result in a symmetrical overall image. The following figure shows the various options for double-sided printing under Xprint V7.0:

	DOUBLE_WIDE & PORTRAIT
SINGLE & PORTRAIT
		DOUBLE_NARROW & PORTRAIT
SINGLE & LANDSCAPE	DOUBLE_WIDE & LANDSCAPE	DOUBLE_NARROW & LANDSCAPE

Figure 6: Options for double-sided printing

-sdside _specification

This option is used to specify whether a form is to be printed only on one side (SINGLE) or on both sides. In the case of double-sided printing you specify the gutter for the portrait side (DOUBLE_WIDE) or for the landscape side (DOUBLE_NARROW). By default, single-sided printing (SINGLE) is set.

28 U23841-J-Z915-6-76