Mackie V7.0 manual Assigning a filter to a printer

Configuring Xprint V7.0 Administering filters

6.10.4 Assigning a filter to a printer

If you frequently use with a printer a specific form which uses a particular format, it might be useful to assign the printer a special filter for this.

i

Only fast filters can be assigned to printers.

Proceed as follows:

●Check the printer status: xpstat -dev [selection]

For selection either specify a list of the printers whose status you want to display, or use the -scl“selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) to define a list of criteria according to which the relevant printers are selected. If you do not specify selection, information on all printers will be displayed.

●If necessary, deactivate the printer: xpchange -dev [selection] -st NOT_ACTIVE

●Assign the relevant filter to the printer: xpmod -dev [selection] -flfilter_name

For filter_name specify the name of the relevant filter.

●Reactivate the printer: xpchange -dev [selection]

U23841-J-Z915-6-76 169