Mackie manual Basic information, Available Xprint V7.0 commands, Command Use

3Producing Output with Xprint V7.0

This chapter describes how to print documents using the command line interface. To begin with, it introduces the basic structure of the Xprint V7.0 commands available to the normal Xprint V7.0 user and describes how and where you can obtain additional information on the commands. This is followed by several sections explaining the most important options for printing documents.

3.1Basic information

This section provides an introduction to using the Xprint V7.0 commands, their basic structure, and how you can access the online help for these commands at any time.

Available Xprint V7.0 commands

Xprint V7.0 provides a number of commands with which you can manipulate the Xprint V7.0 objects. The following table shows the Xprint V7.0 commands you can call as a user:

Command	Use
xpadd	adding print jobs
xpchange	changing the job status
xpdel	deleting print jobs
xpmod	modifying existing print jobs
xpshow	displaying information on Xprint V7.0 objects
xpstat	displaying the status of Xprint V7.0 objects

Table 1: Xprint V7.0 commands

As an ordinary user, you can only use all these commands for the job object. For all other objects you can only use the xpstat and xpshow commands. Only the administrator can also use all the other commands for other objects.

U23841-J-Z915-6-76 15