Mackie V7.0 manual Snmp Agent, Hosts, Options -poand -pdcannot be used for selecting hosts

SNMP Agent Appendix

–You can use the -ikoption to select jobs with a specific status by means of a keyword (e.g. NOT_ACTIVE) (see xpstat -job)

–The options -jt, -teand -sxcannot be used for job selection.

Supervisors

With the -stoption you can select supervisors with a specific status; possible values are ACTIVE or NOT_ACTIVE.

Servers

–With the -stoption you can select servers with a specific status; possible values are ACTIVE, NOT_ACTIVE or SHUTDOWN.

–With the -sioption you can select servers with a specific spoolin state; possible values are ON or OFF.

–With the -sooption you can select servers with a specific spoolout state; possible values are ON or OFF.

Gateways

–You can use the -stoption to select gateways with a specific status; possible values are ACTIVE and NOT_ACTIVE.

–You can use the -gioption to select those gateways which have a specified gateway input status; possible values are ON and OFF.

–You can use the -gooption to select those gateways which have a specified gateway output status; possible values are ON and OFF.

Hosts

The options -poand -pdcannot be used for selecting hosts.

SNMP Agent

The Xprint V7.0 SNMP sub-agent is based on the UCD-SNMP (NET-SNMP) software on Linux and Unix platforms and on the SNMP Microsoft service on Windows NT and Windows 2000.

268 U23841-J-Z915-6-76