Configuring Xprint V7.0

Administering permission lists

Example

To add the user grant on host nashua to the list right1: xpmod -prm right1 -al+ grant@nashua

To add the form A5LAND to the permission list list1: xpmod -rm list1 -al+ A5LAND

6.7.3Deleting a permission list

If a permission list is no longer required, you can delete it from the Xprint V7.0 system.

To do this, proceed as follows:

Log in as the Xprint V7.0 administrator.

Check first whether the permission list you wish to delete is referenced by other Xprint V7.0 objects.

xpshow -usr [selection]permission_list -diR

With permission_list, you specify exactly one permission list to be deleted. If you want to delete several permission lists, you must repeat this command for each of these lists.

If you do not specify a selection, the command refers to all permission lists in the system; otherwise you can either specify a list of the permission lists to be removed, or you can define a list of selection criteria with the -scl“selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) according to which the permission lists to be removed are selected.

If references to the permission list are displayed, you must remove these by modifying the displayed objects accordingly.

Remove the list from the Xprint V7.0 system with the following command: xpdel -prm [selection]

If selection is not specified, the command refers to all the permission lists in the local Xprint V7.0 system. Otherwise you can either specify a list of the permission lists you want to delete, or you can use the -scl“selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) to define a list of criteria according to which the relevant permission lists are selected.

U23841-J-Z915-6-76

147

Page 159
Image 159
Mackie V7.0 manual Deleting a permission list, Example