Mackie V7.0 manual Deactivating a gateway, Examples

Administering gateways Interoperability

Examples

–To delete the only connection originating from the gateway GTW_hudson to the partner gateway GTW_purple:

xpchange -gtw GTW_hudson -st NOT_ACTIVE xpmod -gtw GTW_hudson -ag- GTW_purple xpdel -gtw GTW_purple

xpdel -gtw GTW_hudson

–To delete a gateway connection from the gateway GTW_nashua to the partner gateway GTW_picasso, but maintaining the connections to other partner gateways:

xpchange -gtw GTW_nashua -stN

xpmod -gtw GTW_nashua -ag- GTW_picasso xpdel -gtw GTW_picasso

xpchange -gtw GTW_nashua

7.4.3Deactivating a gateway

If a local gateway is to be modified or temporarily not used, you can lock it against further use by deactivating it. There are three possible ways of doing this:

–You can deactivate a local gateway completely so that no gateway connection (in either direction) can be used.

–You can deactivate the passing on of print jobs to the other printer spooler or only the use of the gateway by the other printer spooler (one direction). This affects all partner systems.

–You can deactivate only the access from one partner gateway to a local gateway. This can prevent a specific remote system from sending requests to the local Xprint V7.0 system.

i

To deactivate a local gateway, you must be logged in as the administrator.

230 U23841-J-Z915-6-76