Configuring Xprint V7.0

Administering PCLs

To add the PCL HP-LASERJETfrom the file hplj (in the directory

/var/spool/Xprint/config/PCL) to the remote host nashua: xpadd -pclHP-LASERJET-ho nashua -fi hplj

6.13.2 Deleting a PCL

Under Xprint V7.0 you can delete from the Xprint V7.0 system any PCL you administer.

Note: A PCL referenced by another object cannot be deleted from the system. This applies, for example, to a PCL which is assigned to a printer in the system.

Check if the PCL to be deleted has any references to other objects: xpshow -pcl [selection]pcl_name -diR

For pcl_name you specify the name of exactly one PCL you want to delete. If you want to want to delete several PCLs, you must repeat this command for each one.

For selection you can either specify a list of PCL names, or you can define a list of selection criteria with the -scl “selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) according to which the PCLs to be deleted are selected.

If references to the PCL are displayed, you must remove these by modifying the displayed objects accordingly.

To delete a PCL from the system, use the following command: xpdel -pcl selection

For selection you can either specify a list of unique PCL names, or you can use the -scl“selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) to define a list of criteria according to which the relevant PCLs are selected and deleted.

Examples

To delete the PCL HP-DESKJETfrom the system: xpdel -pcl HP-DESKJET

To delete all the PCLs which start with the identifier EPSON: xpdel -pcl EPSON\*

U23841-J-Z915-6-76

181

Page 193
Image 193
Mackie V7.0 manual Deleting a PCL, 181