Administering servers

Configuring Xprint V7.0

To add a new server nashua on the remote host colorado:

xpadd -srv nashua -ho colorado xpchange -srv nashua -st ACTIVE

To add the new server delaware based on server nashua on the remote host nile, and to specify that the new server delaware is to process the biggest print jobs first:

xpcopy -srv nashua delaware -ho nile -sp BIG xpchange -srv delaware -st ACTIVE

6.15.2 Deleting a server

With the command xpdel -srvyou can delete any server you administer. When you delete a server, its directory

/var/spool/Xprint/config/SV/server_name is also deleted.

If the server has the status ACTIVE or is connected to an existing supervisor, it cannot be deleted.

Note: If you delete a server, any jobs on it which might still be pending are also deleted.

To delete a server, proceed as follows:

Make sure that the server is no longer connected to a supervisor and that it is not processing any print jobs.

xpshow -srv server_name -diR

For server_name you specify the name of exactly one server you want to delete. If you want to delete several servers, you must repeat this command for each one.

For selection you can either specify a list of form names, or you can define a list of selection criteria with the -scl “selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) according to which the forms to be deleted are selected.

If references to the server are displayed, you must remove these by modifying the displayed objects accordingly.

196

U23841-J-Z915-6-76

Page 208
Image 208
Mackie V7.0 manual Deleting a server, Administering servers Configuring Xprint