Predefined printers

Configuring Xprint V7.0

6.3Predefined printers

Xprint V7.0 allows you to configure a set of predefined printers quickly and easily. This section describes how to add such printers to the system.

Xprint V7.0 provides a special command for this purpose: xpconf_dev. With this command you can configure a printer defined in the /var/spool/Xprint/config/data/conf_dev file with the default param- eters. This file contains a list of printers which can also be extended individually. By default, this list comprises all the printers of Siemens AG.

The xpconf_dev command is the quickest method of configuring an Siemens printer. Also, if you want to configure several similar printers not contained in the list, it is often better to first extend the list and then call the xpconf_dev command instead of configuring these printers individually with the xpadd -devcommand.

The following table serves as a guide to the subsections dealing with configuring predefined printers:

If you want to ...

Read ...

 

 

configure an Siemens printer

section “Configuring predefined

 

printers” on page 109

 

 

extend the list of predefined printers

section “Extending the list of

 

predefined printers” on page 112

 

 

Table 10: Configuring predefined printers

 

108

U23841-J-Z915-6-76

Page 120
Image 120
Mackie V7.0 manual Predefined printers Configuring Xprint, 108