Gateways

Interoperability

The partner gateway must be assigned with the -bllocal_gw option to the local gateway administering the physical connection. local_gw can be an individual gateway or a list of local gateways. In the latter case, the first active gateway in the list is used to send a request to the partner gateway. The option -np TCP defines that the TCP/IP protocol is used. No other protocol can be specified. In addition, the print protocol must be selected with the -pp BSD option.

The option -opoption_list can be used to define the behavior of the local gateway toward the corresponding contact gateway. Here the options "PI=..." and "PA=..." are available. Default values are "PI=721" and "PA=731". This port range is used by the local gateway to establish the connection to the BSD partner.

i

The safest way to define a partner gateway is not to use the -opoption but to accept the default values.

Xprint V7.0 also offers the option of addressing a number of clients via a partner gateway. In this case, use the following command:

xpadd -gtw bsd_group -pp BSD -tp PARTNER -ga 515 \ -ho bsd_host -bl local_gw -oh pattern

For pattern specify a string with replacement characters. These can be either the asterisk (*, representing any string) or the question mark (?, representing any character). This string is used for the host list in the /etc/hosts file, i.e.:

if the option "-op d241p*" is specified, the partner gateway represents all the hosts in the /etc/hosts list which begin with d241p.

Allowing print jobs to be submitted by the BSD spooler

If you want to allow users of the BSD spooler to submit print jobs for local printers via the gateway, the partner gateway must be defined as an allowed gateway at the local gateway. To do this, use the following command:

xpmod -gtwlocal_gw -ag+bsd_partner

With this command, the partner gateway bsd_partner is assigned to the local gateway local_gw as an allowed gateway. Only the BSD systems which are connected to the local Xprint V7.0 domain via allowed partner gateways are allowed to use its print services.

You can also define all partner gateways as allowed gateways by using the keyword ALL:

xpmod -gtw local_gw -ag ALL

218

U23841-J-Z915-6-76

Page 230
Image 230
Mackie V7.0 manual Allowing print jobs to be submitted by the BSD spooler, 218