Mackie V7.0 manual Administering hosts, Configuring the first host

Administering hosts Configuring Xprint V7.0

i

Not all the possible options for each command can be described in this chapter but only the most important ones. For more detailed information see the description of the relevant command in the “Xprint V7.0 - Reference Manual”.

For every command, you can call online help with the -?option. This online help works on two levels: command and option level.

If you call help on command level, the general form of this command will be displayed. This type of help displays the objects supported by the command. It also shows the options which are independent of the object type. Not all the options are displayed, however, as these depend on the use of a command and object together. To call online help on command level, enter xpadd -?, for example.

Option level help displays all the possible options of a specific object type. To call the online help on option level, you must specify the xpadd -dgr-?command, for example.

6.1Administering hosts

This section deals with the Xprint V7.0 objects of type host which must first be edited for new computers in an Xprint V7.0 configuration. The following table serves as a guide through this section:

If you want to...	Read...
configure Xprint V7.0 on the first host	section “Configuring the first host” on
in a network or on a stand-alone	page 96
system
configure Xprint V7.0 on a new host	section “Configuring a new host” on
	page 98
Table 8: Administering hosts

6.1.1Configuring the first host

Configuring Xprint V7.0 on a stand-alone system and configuring the first host in a network only requires a few steps. This is in most cases done by one person, who is referred to below as the Xprint V7.0 administrator. This section is only intended for the Xprint V7.0 administrator. The Xprint V7.0 administrator may be someone who is only responsible for managing Xprint V7.0 or he/she

96 U23841-J-Z915-6-76