Mackie V7.0 manual Deleting a supervisor, To deactivate and delete the supervisor delaware, 205

Configuring Xprint V7.0 Administering supervisors

6.16.4 Deleting a supervisor

With the command xpdel -spvyou can delete any supervisor you administer.

i

A supervisor with the status ACTIVE cannot be deleted. Therefore you must first deactivate the supervisor. You can also not delete a supervisor which is referenced by other objects, e.g. a printer.

To delete a supervisor from the Xprint V7.0 system, proceed as follows:

●Deactivate the supervisor:

xpchange -spv [selection] -st NOT_ACTIVE

For selection you can either specify a list of the supervisors to be deactivated, or you can use the -scl“selection_criteria_list” option (see section “Selection criteria list” on page 266 in the Appendix) to define a list of criteria according to which the relevant supervisors are selected. If selection is not specified, all supervisors are deactivated.

●Check whether the supervisor is referenced by any other objects: xpshow -spv supervisor_name -diR

Cancel any existing references. How to do this is described in the sections dealing with assigning a supervisor to the relevant object (e.g. to a printer).

●Delete the supervisor: xpdel -spv selection

Examples

–To deactivate and delete the supervisor delaware:

xpchange -spv delaware -st NOT_ACTIVE xpdel -spv delaware

–To deactivate and delete all supervisors with the comment “please_delete”:

xpchange -spv -scl "-ca please_delete" -st NOT_ACTIVE xpdel -spv -scl "-ca please_delete"

U23841-J-Z915-6-76 205