Mackie manual Using Xprint V7.0 options, Printing parts of a document

Producing Output with Xprint V7.0 Using Xprint V7.0 options

To print file1 on printer printer2:

xpadd -dr file1

–To configure printers printer1 and printer2 as the default destination:

XP_DESTIN=“printer1 printer2" export XP_DESTIN

To print the file file1 on one of the printers printer1 or printer2: xpadd -dr file1

3.4Using Xprint V7.0 options

This section describes further options for printing files with Xprint V7.0. The individual subsections describe the various possibilities offered by Xprint V7.0 for printing documents.

3.4.1Printing parts of a document

i

In raw mode, printing parts of documents is not supported.

By default, all pages of a document are printed when xpadd is used. If you want to print only specific parts of the file, use one of the following options to select the sections to be printed:

-pspage_select

You can select individual pages or ranges of pages for printing by using one of the following methods:

You can specify individual page numbers separated by commas, e.g.

1,6,7,16

pages 1, 6, 7, and 16 are printed.

You can specify a range of pages a-bwhere b must always be larger than a:

18-34

pages 18 through 34 are printed.

3-

all pages from page 3 onward are printed

U23841-J-Z915-6-76 21