Mackie V7.0 manual Deleting a gateway connection, 229

Interoperability Administering gateways

7.4.2Deleting a gateway connection

A gateway connection that is no longer needed, for example because the remote partner computer no longer exists, can be deleted. If you only want to stop the use of a gateway connection temporarily, you can deactivate it completely or only in one direction (see section “Deactivating a gateway” on page 230).

i

A gateway can only be deleted by the Xprint V7.0 administrator. You must first log in accordingly.

●If you want to delete a partner gateway, you must first check whether the gateway to be deleted is registered as an allowed gateway at the responsible local gateway:

xpshow -gtw local_gw -diL

If this is the case, deactivate the local gateway, remove the partner gateway from the list of allowed gateways and reactivate the local gateway:

xpchange -gtw local_gw -stN xpmod -gtw local_gw -ag- gateway xpchange -gtw local_gw

●To finally delete the gateway, use the following command: xpdel -gtw gateway

where gateway is the name of the gateway to be deleted. If gateway is a local gateway, it must be deactivated before deletion.

i

Bear in mind that a complete gateway connection consists of two gateways - the local gateway and the partner gateway. If you want to delete the connection completely, you must delete both gateways. To find out which gateways are defined, use the xpshow -gtwcommand (see section “Obtaining information on a gateway” on page 233).

U23841-J-Z915-6-76 229