Mackie V7.0 manual Axis box support, TV-CC integration, Configuration

Axis box support Appendix

–XP_SNMP_SYNC_TIME: Validity period for the SNMP agent copy of the Xprint V7.0 information. Any access to Xprint V7.0 agent after this time will enforce a resynchronization of the SNMP agent copy with the "Cache Area". The value must be number expressing the time in seconds. The default value is "10" (10 seconds). The value "0" means that the resynchronization with the "Cache" information occurs at each SNMP access.

The installation aspects are detailed in the release notice.

Axis box support

Introduction

Two axis fast filters have been written to allow Xprint V7.0 to submit job to printer attached to an axis box and to have a follow-up of the printer status ( i.e. : Printer Off, Paper End , ...... ).

These filters are implemented via programs respectively called "prosbsd" for the axis firmware <= 5.20 and "prosbsd6" for axis firmware >= 6.0. The axis box having a firmware version comprised between 5.20 and 6.0 are not currently supported by Xprint V7.0. It is suggested to upgrade the axis box firmware to a version 6.0.

Configuration

The configuration is detailed in the reference guide appendix.

TV-CC integration

When installing the package SIsplgu on a platform where Transview Control Center product is installed (package TV-CCA at least version 3.1A), Xprint V7.0 is automatically integrated in TV-CCA.

Such integration allows the monitoring of Xprint V7.0 printers: any printer error will be intercepted by TV-CC that may initiate a reaction via the Xprint V7.0 graphical interface.

270 U23841-J-Z915-6-76