Administering filters

Configuring Xprint V7.0

6.10.5 Removing a filter from a printer

To remove a filter from a printer, proceed as follows:

Check whether the relevant printer is activated: xpstat -dev [selection]

For selection you can either specify a list of the printers you want to display, or you can use the -scl“selection_criteria_list” option (see the section “Selection criteria list” on page 266 in the Appendix) to define a list of criteria according to which the relevant printers are selected. If you do not specify selection, information on all printers will be displayed.

Deactivate the printer:

xpchange -dev [selection] -st NOT_ACTIVE

Cancel the assignment of the filter to the printer: xpmod -dev [selection] -fl-

Reactivate the printer: xpchange -dev [selection]

170

U23841-J-Z915-6-76

Page 182
Image 182
Mackie V7.0 manual Removing a filter from a printer, To remove a filter from a printer, proceed as follows