Mackie V7.0 manual Deleting a loadable resource, Displaying the definition of a loadable resource

Configuring Xprint V7.0 Administering public loadable resources

6.11.2 Deleting a loadable resource

With the xpdel -lrscommand you can delete any loadable resource that you administer.

To delete a loadable resource, proceed as follow:

●Delete the loadable resource with the following command: xpdel -lrs [identifier_list] [-sclselection_criteria_list]

The identifier_list is a list of the loadable resources to be deleted. You can also use the option -scland then give a selection_criteria_list that specifies certain loadable resources. If you do not specify an identifier_list or a selection _criteria _list, then all loadable resources will be deleted.

Example

To delete the loadable resources mylogo1, mylogo2 and mylogo3:

xpdel -lrs mylogo1 mylogo2 mylogo3

6.11.3 Displaying the definition of a loadable resource

To display the definition of an existing loadable resource, proceed as follows:

●Display the definition using the following command:

xpshow -lrs [identifier_list] [-scl "selection_criteria_list"] -di LONG

For identifier_list you can give a list of the loadable resource to be displayed, or you can use the -scloption to define a list of criteria according to which the relevant loadable resources are displayed. If you do not specify which resources you want to see, then they will all be displayed.

Example

The following command will show you which printers mylogo can be used on:

xpshow -lrs -scl "-cn mylogo"

U23841-J-Z915-6-76 173