Mackie V7.0 manual Assigning a recovery rule to a printer

Administering recovery rules Configuring Xprint V7.0

6.14.2 Assigning a recovery rule to a printer

To make a newly defined recovery rule effective for a printer, you must assign it to the printer. Proceed as follows:

●If the printer is still active, deactivate it: xpchange -dev [selection] -st NOT_ACTIVE

where selection is either the name of one or more printers or a selection criteria list according to which the printers are selected.

●Now you can assign the new recovery rules to an existing printer with the following command:

xpmod -dev [selection] -rr rule_name

This command assigns the recovery rules rule_name to the selected printer(s). The option -rrrule_name can also be specified immediately when a new printer is defined.

●Now you can reactivate the printers: xpchange -dev [selection]

Example

Assigning a recovery rule Standard to all printers in the system:

xpchange -dev -st NOT_ACTIVE xpmod -dev -rr Standard xpchange -dev

6.14.3Canceling the assignment of a recovery rule to a printer

To cancel the assignment of a recovery rule set to a printer because you want to reactivate the system’s default error recovery, proceed as follows:

●If the printer is still active, deactivate it: xpchange -dev [selection] -st NOT_ACTIVE

where selection is either a list of printers to be deactivated or a selection criteria list via which the printers are selected. If selection is not specified, all printers are deactivated.

190 U23841-J-Z915-6-76