Q-Logic 5200, 5202 manual Configured Zonesets Data Windows

4 – Managing Switches	0
Displaying Switch Information

4.2.5

Configured Zonesets Data Windows

The Configured Zonesets data window displays all zone sets, zones, aliases, and zone membership in the zoning database, as shown in Figure 4-6. To open the Configured Zonesets data window, click the Configured Zonesets tab below the data window in the faceplate display. To view the active zone set in the Active Zonesets data window, open the topology display and click the Active Zonesets data window tab.

The Configured Zonesets data window uses display conventions for expanding and contracting entries that are similar to the fabric tree. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the following entries to expand or collapse them:

„A zone set entry expands to show its member zones.

„A zone entry expands to show its members by device port World Wide Name, or device port Fibre Channel address.

„The alias entry expands to show its entries.

Figure 4-6. Configured Zonesets Data Window

4-12 59056-02 A