Q-Logic 5202, 5200 manual Managing Zone Sets, Creating a Zone Set

0	3 – Managing Fabrics
	Zoning a Fabric

3.6.4

Managing Zone Sets

Zoning a fabric involves creating a zone set, creating zones as zone set members, then adding devices as zone members. The zoning database supports multiple zone sets to serve the different security and access needs of your storage area network, but only one zone set can be active at one time. Managing zone sets consists of the following tasks:

„Creating zone sets

„Activating and deactivating zone sets

„Copying a zone to a zone set

„Removing a zone from one zone set or from all zone sets

„Removing a zone set

Note: Changes that you make to the zoning database are limited to the managed switch and do not propagate to the rest of the fabric. To distribute changes to configured zone sets fabric wide, you must edit the zoning databases on the individual switches.

3.6.4.1

Creating a Zone Set

To create a zone set, do the following:

1.Open the Zoning menu, and select Edit Zoning to open the Edit Zoning dialog.

2.Open the Edit menu, and select Create Zone Set to open the Create Zone Set dialog.

3.Enter a name for the zone set, and click the OK button. The new zone set name is displayed in the Zone Sets dialog. A zone set name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, -, ^, and $.

4.To create new zones in a zone set, do one of the following:

„Right-click a zone set and select Create A Zone from the popup menu. In the Create a Zone dialog, enter a name for the new zone, and click the OK button. The new zone name is displayed in the Zone Sets dialog.

„Copy an existing zone by dragging a zone into the new zone set. Refer to ”Copying a Zone to a Zone Set” on page 3-32.

5.Click the Apply button to save changes to the zoning database.

59056-02 A 3-31