Q-Logic 5202, 5200 manual Number of milliseconds the switch

0			A – Command Line Interface
			Set Config Command
	Table A-10. Set Config Switch Parameters (Continued)
	Parameter		Description
	FDMIEnabled	Fabric Device Monitoring Interface.
		Enables (True) or disables (False) the
		monitoring of target and initiator device
		information.
	FDMIEntries	The number of device entries to
		maintain in the FDMI database. Enter a
		number from 0–1000. The default is
		1000.
	DefaultDomainID	Default domain ID. The default is 1.
	DomainIDLock	Prevents (True) or allows (False)
		dynamic reassignment of the
		domain ID. The default is False.
	SymbolicName	Descriptive name for the switch. The
		name can be up to 32 characters
		excluding #, semicolon (;), and comma
		(,). The default is SANbox Manager.
	R_A_TOV	Resource Allocation Timeout Value.
		The number of milliseconds the switch
		waits to allow two ports to allocate
		enough resources to establish a link.
		The default is 10000.
	E_D_TOV	Error Detect Timeout Value. The
		number of milliseconds a port is to wait
		for errors to clear. The default is 2000.
	PrincipalPriority	The priority used in the FC-SW-2
		principal switch selection algorithm. 1 is
		high, 255 is low. The default is 254.
	ConfigDescription	Switch configuration description. The
		configuration description can be up to
		32 characters excluding #, semicolon
		(;), and comma (,). The default is
		Config Default.

59056-02 A A-43