
0 |
|
| A – Command Line Interface |
|
|
| |
|
|
| Show Command |
|
|
|
|
|
|
|
|
| Table | ||
|
|
| |
| Entry | Description | |
|
|
| |
| PrimSeqErrors | Primitive sequence errors detected. | |
| RxLinkResets | Number of link reset primitives received from an attached | |
|
| device. | |
| RxOfflineSeq | Number of offline sequences received. An OLS is issued | |
|
| for link initialization, a Receive & Recognize | |
|
| Not_Operational (NOS) state, or to enter the offline state. | |
| TotalErrors | Total number of errors detected. | |
| TotalLIPsRecvd | Number of loop initialization primitive frames received by | |
|
| this port. | |
| TotalLIPsXmitd | Number of loop initialization primitive frames transmitted | |
|
| by this port. | |
| TotalLinkResets | Total number of link reset primitives. | |
| TotalOfflineSeq | Total number of Offline Sequences issued and received by | |
|
| this port. | |
| TotalRxFrames | Total number of frames received by this port. | |
| TotalRxWords | Total number of words received by this port. | |
| TotalTxFrames | Total number of frames issued by this port. | |
| TotalTxWords | Total number of words issued by this port. | |
| TxLinkResets | Number of Link Resets issued by this port. | |
| TxOfflineSeq | Total number of Offline Sequences issued by this port. | |
|
|
|
|
post log
Displays the Power On Self Test (POST) log which contains results from the most recently failed POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the ”Show Setup Command” on page
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric.