Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5202, 5200 manual Arbff

Models: 5200 5202

1 268

Download 268 pages 9.43 Kb

Page 197

0			A – Command Line Interface
			A – Command Line Interface
				Set Config Command


ARB_FF	(True /	False)		[False	]
InteropCredit	(decimal value, 0-255)			[0	]
ExtCredit	(dec value, increments of 15, non-loop only)			[0	]
FANEnable	(True /	False)		[True	]
AutoPerfTuning (True / False)				[False ]
LCFEnable	(True /	False)		[False ]
MFSEnable	(True /	False)		[False ]
VIEnable	(True /	False)		[False	]
MSEnable	(True /	False)		[True	]
NoClose	(True /	False)		[False ]
IOStreamGuard	(Enable	/ Disable / Auto)		[Disable]
PDISCPingEnable (True / False)				[True	]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config		activate command) before it can take effect.
To discard this configuration use the config cancel command.
SANbox Manager (admin-config) #>

The following is an example of the Set Config Port command for a 10-Gbps port:

SANbox Manager #> admin start
SANbox Manager (admin)		#> config edit
SANbox Manager (admin-config) #> set config port 16
A list of attributes		with formatting and current values will follow.
Enter a new value or		simply press the ENTER key to accept the current value.
If you wish to	terminate this process before reaching the end of the			list
press 'q' or 'Q' and		the ENTER key to do so.
Configuring Port Number: 16
------------------------
AdminState	(1=Online, 2=Offline, 3=Diagnostics, 4=Down) [Online			]
LinkSpeed	(10=10Gb/s)		[10Gb/s	]
PortType	(G / F)		[G	]
SymPortName	(string, max=32 chars)		[10G-16	]
DeviceScanEnable	(True	/ False)	[True	]
ForceOfflineRSCN	(True	/ False)	[False	]
AutoPerfTuning	(True	/ False)	[Fales	]
LCFEnable	(True	/ False)	[False	]
MFSEnable	(True	/ False)	[False	]
VIEnable	(True	/ False)	[False	]

59056-02 A

A-47

Image 197

Q-Logic 5202, 5200 manual Arbff

Contents

SANbox 5200 Series Switch Management User’s Guide Document Revision History SANbox 5200 Series Switch Management User’s GuideTable of Contents Section Managing Fabrics SANbox 5200 Series Switch Management Section Managing Switches Changing the Default Performance View File Encryption Key 4.1 Snmp Configuration 4.2 Snmp Trap ConfigurationSection Managing Ports 3.3 NTP Client7.3 Appendix a Command Line InterfaceGlossary Index Shutdown Command102 104Page 105 TablesSANbox 5200 Series Switch Management User’s Guide 59056-02 a Related Materials Intended AudienceJdom License Availability Technical SupportTraining Contact InformationIntroduction Technical Support 59056-02 a Installing the Management Application Using SANsurfer Switch ManagerFor a Windows workstation SANsurfer Switch ManagerFor a Linux workstation For a Solaris workstationSANsurfer Management Suite SMS Installation for WindowsChglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer commandSANsurfer Switch Manager Window Exiting SANsurfer Switch ManagerSave Default Fabric View File Dialog SMS Uninstall Uninstalling SANsurfer Switch ManagerChanging the Encryption Key for the Default Fabric View File Standalone UninstallSaving and Opening Fabric View Files Setting SANsurfer Switch Manager PreferencesPreferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online HelpFaceplate Display SANsurfer Switch Manager User InterfaceTopology Display Topology Display Menu Menu BarsFaceplate Display Menu Faceplate Display MenuTopology Display Menu Shortcut Keys Topology Display Shortcut KeysFaceplate Display Shortcut Keys Faceplate Display Shortcut KeysAlt+S, L SwitchLoad Firmware Tool Bar Buttons Tool BarFabric Tree Fabric TreeData Window and Tabs Working Status IndicatorGraphic Window Switch and Link Status Using the Topology DisplayArranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Topology Data Windows Opening the Faceplate Display and Topology Popup Menus11. Faceplate Display Using the Faceplate DisplaySelecting Ports Port Views and StatusWorking with Ports Faceplate Data Windows Opening the Faceplate Popup MenuPage User Account Security Fabric SecurityEnabling Snmp Configuration Fabric ServicesClick the In-band Management Enable button Enabling In-band ManagementViewing and Comparing Version Snapshots Fabric TrackerSaving a Version Snapshot Managing the Fabric Database Exporting Version Snapshots to a FileAdd a New Fabric Dialog Adding a FabricOpening a Fabric View File Removing a FabricSaving a Fabric View File Rediscovering a FabricAdding a New Switch to a Fabric Deleting Switches and LinksReplacing a Failed Switch Displaying Fabric Information Fabric Status Topology Display Switch and Status IconsEvents Browser Displaying the Event BrowserDescription Icon Severity LevelsFilter Events Dialog Filtering the Event BrowserSaving the Event Browser to a File Sorting the Event BrowserDevices Data Window Entries Devices Data WindowActive Zone Set Data Window Active Zone Set Data WindowDisplaying Detailed Device Information Link Data WindowWorking with Device Information and Nicknames Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Soft Zones ZonesZone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Edit Zoning Dialog Editing the Zoning DatabaseEdit Zoning Dialog Tool Bar Buttons and Icons Create Alias button create another name for a set of objects Interop Auto Save Configuring the Zoning DatabaseRestoring the Zoning Database from a File Default VisibilitySaving the Zoning Database to a File Removing All Zoning Definitions Restoring the Default Zoning DatabaseCreating a Zone Set Managing Zone SetsRemoving a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Removing a Zone from All Zone SetsCreating an Alias Changing Zone TypesManaging Aliases Removing an Alias from All Zones Adding a Member to an AliasZone Merge Failure Merging Fabrics and ZoningZone Merge Failure Recovery Managing Switches Factory User Accounts Managing User AccountsCreating User Accounts User Account Administration Dialog Add AccountRemoving a User Account User Account Administration Dialog Remove AccountUser Account Administration Dialog Change Password Changing a User Account PasswordModifying a User Account User Account Administration Dialog Modify AccountFaceplate Display Switch Information Displaying Switch InformationSwitch Data Window Entries Switch Data WindowRatov Displaying Detailed Device Information on page 3-17for Port Information Data Window Port Statistics Data WindowConfigured Zonesets Data Window Configured Zonesets Data WindowsPort Threshold Alarm Configuration Dialog Configuring Port Threshold AlarmsEvent Paging a SwitchCount Sample WindowResetting a Switch Setting the Date/Time and Enabling NTP ClientType Description Switch ResetsSwitch Properties Configuring a SwitchUsing the Configuration Wizard Switch Administrative States Symbolic NameDomain ID and Domain ID Lock Switch Administrative StatesFabric Device Management Interface In-band Management Interop Mode for ZoningBroadcast Support Legacy Port Address Format Timeout ValuesTimeout Values 10. Network Properties Dialog Network PropertiesIP Configuration Parameters IP ConfigurationNTP Client Remote Logging11. Snmp Properties Dialog Snmp PropertiesSnmp Configuration Parameters Snmp ConfigurationSnmp Trap Configuration Parameters Snmp Trap ConfigurationRestoring a Switch Archiving a Switch12. Restore Dialogs Full and Selective Factory Default Configuration Settings Restoring the Factory Default ConfigurationFactory Default Configuration Settings Downloading a Support File 13. Features License Key Dialog Upgrading the Switch Using License KeysInstalling Firmware 15. Hardware Status LEDs Displaying Hardware StatusDisplaying Port Information Managing PortsPort Types Monitoring Port StatusDisplaying Port Types Displaying Port Speeds Displaying Port Operational StatesPort Operational States Port SpeedsPort Transceiver Media View Displaying Transceiver Media StatusPort Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring PortsPort Administrative States Changing Port Administrative StatesChanging Port Types Changing Port SpeedsScan Device Stream GuardUsing the Extended Credits Wizard Changing Port Symbolic NameDesignate Donor Ports Resetting a PortPort Loopback Test Dialog Testing PortsManaging Ports Fabric View Graphs Graphing Port PerformanceExiting SANsurfer Performance Viewer Starting SANsurfer Performance ViewerSaving and Opening Performance View Files Save Default Performance View File DialogSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeyDisplaying Graphs Setting the Polling FrequencyCustomizing Graphs Arranging Graphs in the DisplayManaging Ports Graphing Port Performance Saving Graph Statistics to a File Rescaling a Selected GraphPrinting Graphs Managing Ports Graphing Port Performance 59056-02 a Logging On to a Switch Command Line InterfaceUser Accounts Modifying a Configuration Working with Switch ConfigurationsFtp ipaddress Backing up and Restoring Switch ConfigurationsDate, configswitch16910112003, for example Command syntax is as follows CommandsCommand keyword keyword value Table A-1. Command-Line CompletionAdmin Session Commands Table A-2. Commands Listed by Authority LevelAuthority Admin CommandSyntax KeywordsSyntax alias Alias CommandRename aliasold aliasnew Members aliasRemove alias memberlist Syntax config Config CommandKeywords activate configname Edit confignameManager Archive function are not compatible with the Config RestoreRestore command Save confignameDownload the file to the workstation # ftp symbolicname or ipaddressAdmin session Create Support CommandFollowing is an example of the Create Support command Create supportYou have transferred 43430 bytes in 1 files Keywords MMDDhhmmCCYY Date CommandSyntax date Syntax feature Feature CommandKeywords add licensekey LogSyntax firmware install Firmware Install CommandAuthority Admin Syntax Hardreset CommandKeywords command Help CommandSyntax help command keyword Authority NoneAuthority None Syntax history History CommandHotreset Hotreset CommandImage Command Ftp Ftp switchname Wait for the unpack to complete Following is an example of the Lip command Lip CommandReinitializes the specified loop port Lip portnumberSyntax passwd accountname Keywords accountname Passwd CommandKeywords ipaddress Ping CommandSyntax ping ipaddress Following is an example of the Ps command Ps CommandSyntax Examples Displays current system process informationSyntax quit, exit, or logout Quit CommandCloses the Telnet session Config configname Reset CommandZoning Table A-3. Switch Configuration DefaultsSystem Table A-4. Port Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-5. Port Threshold Alarm Configuration DefaultsTable A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Syntax set Set CommandPort option Setup optionSwitch state Set config Set Config CommandTable A-9. Set Config Port Parameters Port portnumberCommand Line Interface Set Config Command Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Number of milliseconds the switch Table A-10. Set Config Switch Parameters Threshold Table A-11. Set Config Threshold ParametersTable A-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Threshold command Following is an example of the Set Config Switch commandTo discard this configuration use the config cancel command Attributes Following is an example of the Set Config Zoning commandSet log Set Log CommandArchive ClearLevel filter Display filterSave Port portlistStart StopSet Port Command Down Port from accepting a device loginDisables the port by removing power from the port lasers Set setup Set Setup CommandTable A-13. Snmp Configuration Settings Snmp SystemTable A-14. System Configuration Settings Table A-14. System Configuration Settings Setup snmp SANbox Manager admin # set setup system Following is an example of the Set Setup System commandAlarm option Show CommandKeywords about BroadcastLog option Fdmi portwwnPagebreak Ns optionPerf option Table A-15. Show Port ParametersLipalpdalps Steering domainid Post logSupport Table A-16. Switch Operational ParametersDisplays all connected devices TopologyUsers VersionFollowing is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi commandFollowing is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Collisions0 txqueuelen100 Following is an example of the Show Interface commandPL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch commandCommand Line Interface Show Command Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show log Show Log CommandNumber of events ComponentLevel SettingsOptions PortFollowing is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Errors portnumber Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Test Test CommandPort portnumber testtype StatusAdmin start Command Line Interface Test Command Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command Following is an example of the User Edit command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the User Delete commandWhoami Whoami CommandFollowing is an example of the Whoami command Syntax zone Zone CommandRemove zone memberlist Members zoneRename zoneold zonenew Type zone zonetypeFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandZones zoneset Remove zoneset zonelistRename zonesetold zonesetnew History Zoning CommandOpens a Zoning Edit session Table A-17. Zoning Database Limits LimitsE1JBOD1 E2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command 108 59056-02 a Administrative State Access Control List ZoneAlarm BootPConfigured Zone Sets Class 3 ServiceDefault Visibility Fabric Management SwitchInter-Switch Link Input Power LEDMaintenance Button Maintenance ModeSmall Form-Factor Pluggable Zoning DatabaseSoft Zone TargetIndex Index-2 59056-02 a 59056-02 a Index-3 Index-4 59056-02 a 59056-02 a Index-5 Index-6 59056-02 a