Q-Logic 5202, 5200 manual Setup snmp

0	A – Command Line Interface
	Set Setup Command

Examples The following is an example of the Set Setup SNMP command:

SANbox Manager	#> admin start
SANbox Manager	(admin) #> set		setup snmp
A list of attributes with formatting and current					values will follow.
Enter a new value or simply			press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or	'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency,		alert, critical, error, warning, notify, info, debug, mark
SNMPEnabled		(True /	False)		[True	]
Contact		(string, max=64		chars)	[<sysContact undefined]
Location		(string, max=64		chars)	[sysLocation undefined]
Trap1Address		(dot-notated IP		Address)	[10.20.71.15	]
Trap1Port		(decimal value)			[162	]
Trap1Severity		(see allowed options above)			[warning	]
Trap1Version		(1 / 2)			[2	]
Trap1Enabled		(True /	False)		[False	]
Trap2Address		(dot-notated IP		Address)	[0.0.0.0	]
Trap2Port		(decimal value)			[162	]
Trap2Severity		(see allowed options above)			[warning	]
Trap2Version		(1 / 2)			[2	]
Trap2Enabled		(True /	False)		[False	]
Trap3Address		(dot-notated IP		Address)	[0.0.0.0	]
Trap3Port		(decimal value)			[162	]
Trap3Severity		(see allowed options above)			[warning	]
Trap3Version		(1 / 2)			[2	]
Trap3Enabled		(True /	False)		[False	]
Trap4Address		(dot-notated IP		Address)	[0.0.0.0	]
Trap4Port		(decimal value)			[162	]
Trap4Severity		(see allowed options above)			[warning	]
Trap4Version		(1 / 2)			[2	]
Trap4Enabled		(True /	False)		[False	]
Trap5Address		(dot-notated IP		Address)	[0.0.0.0	]
Trap5Port		(decimal value)			[162	]
Trap5Severity		(see allowed options above)			[warning	]
Trap5Version		(1 / 2)			[2	]
Trap5Enabled		(True /	False)		[False	]
ReadCommunity		(string, max=32		chars)	[public	]
WriteCommunity		(string, max=32		chars)	[private	]

59056-02 A A-59