0 |
|
| A – Command Line Interface |
|
|
| |
|
|
| Zoneset Command |
|
|
|
|
| list |
|
|
|
|
| |
| Displays a list of all zone sets. This keyword does not require an Admin session. | ||
| remove [zone_set] [zone_list] | ||
| Removes a list of zones given by [zone_list] from the zone set given by | ||
| [zone_set]. Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the | ||
| active zone set, the zone will not be removed until the zone set has been | ||
| deactivated. | ||
| rename [zone_set_old] [zone_set_new] | ||
| Renames the zone set given by [zone_set_old] to the name given by | ||
| [zone_set_new]. You can rename the active zone set. | ||
| zones [zone_set] | ||
| Displays all zones that are components of the zone set given by [zone_set]. This | ||
| keyword does not require an Admin session. | ||
Notes | | A zone set must be active for its definitions to be applied to the fabric. | |
Only one zone set can be active at one time.
A zone can be a component of more than one zone set. Examples The following is an example of the Zoneset Active command:
SANbox Manager #> zoneset active
ActiveZoneSet Bets
LastActivatedBy
LastActivatedOn day month date time year
The following is an example of the Zoneset List command:
SANbox Manager #> zoneset list
Current List of ZoneSets
alpha beta
The following is an example of the Zoneset Zones command:
SANbox Manager #> zoneset zones ssss
Current List of Zones for ZoneSet: ssss
zone1
zone2
zone3
