0

 

A – Command Line Interface

 

 

 

 

Show Log Command

 

 

 

 

 

 

 

Zoning

 

Monitors zoning conflict events.

 

display [filter]

 

Displays log events on the screen according to the component or severity level

 

filter given by [filter]. [filter] can be one of the following:

 

Info

 

Displays all informative events.

 

Warning

 

Displays all warning events.

 

Critical

 

Displays all critical events.

 

Eport

 

Displays all events related to E_Ports.

 

Mgmtserver

 

Displays all events related to the management server.

 

Nameserver

 

Displays all events related to the name server.

 

Port [port_number]

 

Displays all events related to the port given by [port_number].

 

SNMP

 

Displays all events related to SNMP.

 

Switch

 

Displays all events related to switch management.

 

Zoning

 

Displays all events related to zoning.

 

level

 

Displays the event severity level logging setting and the display level setting.

 

options

 

Displays the options that are available for configuring event logging and automatic

 

display to the screen. Refer to the for information about how to configure event

 

logging and display level.

 

port

 

Displays the ports being monitored for events. If an event occurs which is of the

 

defined level and on a defined component, but not on a defined port, no entry is

 

made in the log.

 

settings

 

Displays the current filter settings for component, severity level, port, and display

 

level. This command is equivalent to executing the following commands

 

separately: Show Log Component, Show Log Level, and Show Log Port.

59056-02 A

A-81

Page 231
Image 231
Q-Logic 5202, 5200 manual Level, Options, Port, Settings