Q-Logic 5202, 5200 manual Show Perf Command

0	A – Command Line Interface
	Show Perf Command

Show Perf Command

Displays port performance in frames/second and bytes/second. If you omit the keyword, the command displays data transmitted (out), data received (in), and total data transmitted and received in frames/second and bytes per second.

Authority	None
Syntax	show perf
	byte [port_number]
	inbyte [port_number]
	outbyte [port_number]
	frame [port_number]
	inframe [port_number]
	outframe [port_number]
	errors [port_number]
Keywords	byte [port_number]
	Displays continuous performance data in total bytes/second transmitted and
	received for the port group (0–15 or 16–19) that includes [port_number]. If you
	omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to
	stop the display.
	inbyte [port_number]
	Displays continuous performance data in bytes/second received for the port group
	(0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports
	0–15 are displayed. Type “q” and press the Enter key to stop the display.

outbyte [port_number]

Displays continuous performance data in bytes/second transmitted for the set of

16ports (0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.

frame [port_number]

Displays continuous performance data in total frames/second transmitted and received for the set of 16 ports (0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.

inframe [port_number]

Displays continuous performance data in frames/second received for the port group (0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.

outframe [port_number]

Displays continuous performance data in frames/second transmitted for the port group (0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.

59056-02 A A-83